China wholesaler 2BV 2be Sk 2sk Sz in China Electric Stainless Steel Single Two Double Multi Stage Liquid Water Ring Vacuum Pump Insystem Chemical Papermaking Machine Extruder supplier

Product Description

COMPANY SHOW:

20 Years
   ZiBoZhuoXin Pump Industry co,.Ltd is located in a century industrial city known as the Pump Capital of China—HangZhou city, ZheJiang Province.  Has over 20 years’ experience of manufacturing vacuum pumps and 10+ years’ experience of exporting.
Various products
   We can suppply all type of vacuum pumps and spare parts in China, 2BV/2BEA/2BEC/SK/2SK/JZJ2B/ etc, and other industrial machine;
24 Hours
   Please do not hestiate to contact us if have any urgent matters,each of your inquiries will be taken into account and get our response within 24 hours.

Product Main feature:
2BVC series water ring vacuum pumps and compressor is mainly used for sucking gases and water vapor .The ultimate suction pressure can reach 33mbar (abs) (i.e. 97 degree). When the liquid ring vacuum pumps work under the condition near the limited vacuum for a long time, it is necessary to connect with the cavitation resistant pipe in order to get rid of the screaming and protect the pump.
We are offering 2bvc series liquid ring vacuum pumps.

 

MAIN APPLICATION AREAS:

  • Vacuum filtering – Chemical filtering factories, chemical processing factories, iron ore factory, mining, phosphorite, paper making, poultry processing, coal-selecting factories.
  • Vacuum distillation – milk factory, foodstuff processing, chemical industry, the paper plasma factory.
  • Vacuum disinfection – hospital, infirmary, the laboratory.
  • Molding – Plastic, the polyethylene, rubber, tire manufacture etc.
  • Rebirth the compressed air – the paper plasma, iron and steel, automobile, glasses, chemical industry.

 

Product model Maximum air volume Limit Vacuum Degree
mbar(MPa)
Motor power
kW
Explosion-proof grade of motor Motor Protection Level Pump speed
r.p.m
Working fluid flow rate
L/min
noise
dB(A)
Weight
kg
m3/min m3/h
2BVC2 060 0.45 27 33mbar
(-0.098MPa)
0.81 No explosion proof IP54 2840 2 62 31
2BVC2 061 0.87 52 1.45 2840 2 65 35
2BVC2 070 1.33 80 2.35 2860 2.5 66 56
2BVC2 071 1.83 110 3.85 2880 4.2 72 65
2BVC2 060-Ex 0.45 27 1.1 IP55 2840 2 62 39
2BVC2 061-Ex 0.86 52 1.5 2840 2 65 45
2BVC2 070-Ex 1.33 80 3 2860 2.5 66 66
2BVC2 071-Ex 1.83 110 4 2880 4.2 72 77
2BVC5 110 2.75 165 4 No explosion proof IP54 1440 6.7 63 103
2BVC5 111 3.83 230 5.5 1440 8.3 68 117
2BVC5 121 4.67 280 7.5 1440 10 69 149
2BVC5 131 6.67 400 11 1460 15 73 205
2BVC5 161 8.33 500 15 970 20 74 331
2BVC6 110-EX 2.75 165 4 dIIBT4 IP55 1440 6.7 63 153
2BVC6 111-EX 3.83 230 5.5 1440 8.3 68 208
2BVC6 121-EX 4.66 280 7.5 1440 10 69 240
2BVC6 131-EX 6.66 400 11 1460 15 73 320
2BVC6 161-EX 8.33 500 15 970 20 74 446

2bv series of vacuum pumps adopt the advance international technology with the close-coupled design. With the advantages of high reliable performance, easy maintenance, lower noise, high efficiency and energy saving, this series of pumps are widely applied in fields of chemical industry, papermaking, and metallurgy industry and so on.
Due to its competitive price and higher performance, our pump is best choice for CZPT and some italy pump replacement.

FAQ

Q: What’s your MOQ?
A: One set;

Q: What are the causes of no flow or insufficient flow of centrifugal pump?
A: There is air in the suction pipe or pump, which needs to be discharged. Air leakage is found in the suction pipeline, and the leakage is repaired. If the valve of suction line or discharge line is closed, relevant valve shall be opened. If the suction height is too high, recalculate the installation height. The suction line is too small or blocked.

Q: How to resist cavitation in centrifugal pump?
A: Improve the structure design from the suction to the impeller of the centrifugal pump;Adopt double stage suction impeller and use anti-cavitation material;

Q:What is the function of rubber ball in water ring vacuum pump?
A: Rubber ball in water ring vacuum pump, the correct name is called rubber ball valve. Its role is to eliminate the pump equipment in the operation process of the phenomenon of over compression or insufficient compression.

Q:How long is warranty?
A:One year formain construction warranty.

Q:How can I pay for my items? What is the payment you can provide
A:Usually by T/T, 30%-50% deposit payment once PI/Contract confirmed, then the remaining balance will be paid after inspection and before shipment via T/T or L/C;

welcome client from home and abroad to contact us for future cooperation.

Detail size drawing and install drawing please contact our sales in charge to get;

key:nash/simense/refurish/vacuum pumps/HangZhou CZPT pump/

After-sales Service: 1 Year
Warranty: 1 Year
Oil or Not: Oil Free
Structure: Reciprocating Vacuum Pump
Exhauster Method: Positive Displacement Pump
Vacuum Degree: High Vacuum
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Vacuum Pump

How to install a vacuum pump

A vacuum pump creates a relative vacuum within a sealed volume by drawing gas molecules from the sealed volume. Vacuum pumps can be used in a variety of industrial applications. They also offer various lubrication options. If you are considering purchasing, please understand its functions and features before purchasing.

How it works

The working principle of a vacuum pump is called gas transfer. The principle can be further divided into two basic categories: positive displacement and momentum transfer. At high pressure and moderate vacuum, gas molecules collide and move and create a viscous flow. At higher vacuum levels, gas molecules separate to create molecular or transitional flows.
Another principle of vacuum pumps is fluid-tightness. There are two main types of seals: rotary seals and screw seals. Rotary seals prevent liquid leakage, while screw seals only allow liquids to flow out at higher pressures. Some pumps may not use the third seal.
The flow rate of the vacuum pump determines the machine’s ability to pump a certain amount of material. A higher pumping speed will shorten the drain time. Therefore, the mass flow of the vacuum pump must be carefully considered. The speed and type of vacuum must also be considered.
The working principle of a vacuum pump is to push gas molecules from a high-pressure state to a low-pressure state. This creates a partial vacuum. There are many different types of vacuum pumps, each with different functions. Some are mechanical, some are chemical. In either case, their function is the same: to create a partial or complete vacuum. Vacuum pumps use a variety of technologies and are sized according to the application. Proper sizing is critical for optimum efficiency.
Gas transfer pumps use the same principles as vacuum pumps but use different technology. One of the earliest examples is the Archimedes spiral. Its structure consists of a single screw inside a hollow cylinder. More modern designs use double or triple screws. The rotation of the screw causes gas molecules to be trapped in the cavity between the screw and the housing. The fluid is then discharged at slightly above atmospheric pressure. This difference is called the compression ratio.
Another type of vacuum pump is a diffusion pump. Its main use is industrial vacuum processing. It is used in applications such as mass spectrometry, nanotechnology and analytical instrumentation. These pumps are generally inexpensive to purchase and operate.

Apply

Vacuum pumps are essential for many scientific and industrial processes. They are used in the production of vacuum tubes, CRTs, lamps and semiconductor processing. They can also be used to support mechanical equipment. For example, they can be mounted on the engine of a motor vehicle. Likewise, they can be used to power hydraulic components of aircraft. Among other uses, the vacuum pump helps calibrate the gyroscope.
Vacuum pumps are widely used in the pharmaceutical industry and are one of the largest users of this technology. They help deal with hazardous materials and eliminate waste quickly. They are also used in power jets, dump fuel tanks and rear doors, among others. However, they are sensitive to contamination and should only be used in environments where leaks can be prevented. Therefore, choosing the right fluid for the application is very important.
The most popular type of vacuum pump is the rotary vane pump. These pumps are known for their high pumping speed and low pressure. Their efficient pumping capacity allows them to reach pressures below 10-6 bar. Additionally, they are usually oil-sealed and have excellent vacuuming capabilities.
Vacuum pumps are often used to remove air from closed systems. They create a vacuum by reducing the density of the air in the compressed space. This is done by using the mechanical force energy generated by the rotating shaft. When the pump is under pressure, it converts this energy into pneumatic power. When the pressure is different, the energy produced depends on the volume of the gas and the pressure difference between the inner and outer atmospheres.
Vacuum pumps are also used in the manufacture of solar cells. They are used in the manufacture of solar cells, including ingot casting processes as well as cell and module processes. The design of the vacuum system plays an important role in reducing the cost of the process, thus making it profitable. Due to their low maintenance costs, they are an invaluable tool for making solar cells.
Vacuum pumps are widely used in many applications. In addition to industrial and research uses, they are also used in water remediation.
Vacuum Pump

Oil Lubrication Option

Vacuum pumps are available in a variety of oil lubrication options. Choosing the right lubricant can help protect your vacuum pump and maximize its performance. Different base oils may contain different additives, such as antioxidants, and some contain additional additives for specific purposes. You should choose an oil with the right concentration of these additives for optimal lubrication of your vacuum pump.
Vacuum pumps are usually lubricated with paraffinic mineral oil. However, this type of lubricant evaporates as the temperature increases. To minimize evaporative losses, choose a lubricant with low vapor pressure. Also, you should choose lubricants that are resistant to extreme temperatures. Extreme temperatures can put extra stress on the oil and can even significantly shorten the life of the oil.
In terms of viscosity, synthetic oils are the best choice for vacuum pumps. These types of oils are designed to resist gas dissolution and are more resistant to corrosion. Therefore, synthetic oils are ideal for handling aggressive substances. Whether or not your pump needs lubrication, choosing a quality product is important.
The vacuum pump oil should be changed periodically according to the manufacturer’s recommendations. If you use a filter, you should also change the oil as soon as the filter reaches the end of its life. Unplanned oil changes will eventually cause the vacuum pump to not reach its maximum vacuum capacity.
You can buy vacuum pump oil from vacuum pump manufacturers or other suppliers. These options are available in a variety of sizes, and labels can be customized. The oil should be designed for the pump. However, you should check the manufacturer’s recommendations to avoid buying the wrong type.
If you choose to use a synthetic oil, it is important to use a good quality oil. It helps the pump work more efficiently and prolong its life.
Vacuum Pump

Install

After choosing a suitable location, the next step is to install the pump. First, place the pump on a flat surface. Then, screw the pump onto the motor body above the check valve. Make sure the accessories are wrapped with sealing tape and secured with screws. The direction of gas inflow and outflow is indicated by arrows on the pump. The direction of rotation around the pump is also shown.
During commissioning, check the operation of each part of the pump. If the pump is equipped with a pipe connection, the pipe should be the same size and shape as the pump flange. Also, make sure that the piping does not cause any pressure drop. In addition, the first three weeks of operation require the installation of protective nets at the suction ports.
When selecting a pump, consider the back pressure of the system. Too much back pressure will affect the capacity of the vacuum pump. Also, check the temperature of the seal. If the temperature is too high, the seal may be damaged. It could also be due to a partially closed valve in the recirculation line or a clogged filter. Circulation pumps and heat exchangers should also be checked for fouling.
The vacuum pump is usually installed in the chassis area of ​​the car. They can be mounted next to the engine or on a lower support frame. They are usually fastened to the bracket using suitable shock absorbers and isolating elements. However, before installing the vacuum pump, be sure to check the vacuum pump’s wiring harness before connecting it to the vehicle.
In many experimental setups, a vacuum pump is essential. However, improperly installed vacuum pumps can expose users to harmful vapors and chemicals. Appropriate plugs and belt guards should be installed to prevent any accidental chemical exposure. It is also important to install a fume hood for the pump.
In most cases, vacuum pumps come with installation manuals and instructions. Some manufacturers even offer start-up assistance if needed.

China wholesaler 2BV 2be Sk 2sk Sz in China Electric Stainless Steel Single Two Double Multi Stage Liquid Water Ring Vacuum Pump Insystem Chemical Papermaking Machine Extruder   supplier China wholesaler 2BV 2be Sk 2sk Sz in China Electric Stainless Steel Single Two Double Multi Stage Liquid Water Ring Vacuum Pump Insystem Chemical Papermaking Machine Extruder   supplier
editor by CX 2023-07-11