Merchandise Description
Solution Description
2BV sequence drinking water ring vacuum pump is ideal for pumping out gas and h2o vapor. The suction force can reach 33mbar absolute strain (ninety seven% vacuum diploma). When the water ring vacuum pump functions for a long time when the suction stress is close to the restrict vacuum (saturated vapor stress of operating fluid), its protection pipe shall be related to safeguard the pump. O2bv series water ring vacuum pump is the most recent generation of vitality-preserving products. With its outstanding performance and numerous positive aspects, it will comprehensively replace SK and 2SK series water ring vacuum pumps and W, WY and WL reciprocating vacuum pumps with the identical vitality.
Our Advantages
The direct relationship layout of motor saves place, is simple to put in and preserve.
all mechanical seals are utilized as sulfur configuration.
there is a cavitation defense pipe interface. If it performs below the limit force, open the cavitation acid pipe interface to remove the cavitation audio and protect the pump under the situation of ensuring the optimum suction furnace.
the whole series is geared up with Bu Yu impeller, which enhances the corrosion resistance of the pump.
the exclusive adaptable exhaust port design and style will not shrink, ensuring the very best efficiency of the pump inside of its performance selection.
Product Parameters
| Kind | Greatest air volume mthree/min |
Strain limit Pa | power kW | revolution rpm | Motor explosion-proof grade | H2o consumption L/min |
noise dB(A) | weight kg |
| 2BV2060-EX | .forty five | 3300 | one.1 | 2880 | d II BT4 | 2 | sixty two | 39 |
| 2BV2061-EX | .87 | 3300 | one.5 | 2880 | d II BT4 | 2 | sixty five | 45 |
| 2BV2070-EX | 1.33 | 3300 | two.two | 2880 | d II BT4 | two.five | 66 | sixty six |
| 2BV2071-EX | 1.83 | 3300 | 3 | 2880 | d II BT4 | 4.two | seventy two | 77 |
| 2BV6110 | 2.seventy five | 3300 | four | 1450 | d II BT4 | seven | sixty three | 153 |
| 2BV6111 | 3.eighty three | 3300 | five.5 | 1450 | d II BT4 | 8.5 | sixty eight | 208 |
| 2BV6121 | 4.sixty eight | 3300 | seven.five | 1450 | d II BT4 | ten | 69 | 240 |
| 2BV6131 | six.68 | 3300 | 11 | 1450 | d II BT4 | fifteen | seventy three | 320 |
| 2BV6161 | eight.three | 3300 | fifteen | 970 | d II BT4 | 20 | 74 | 446 |
Thorough Pictures
Standard Supervisor Speech
Deeply cultivate the vacuum engineering, and study,develop and manufacture the vacuum tools to provide the best solution in the vacuum field and make the vacuum application less complicated.
Business Profile
ZheJiang Kaien Vacuum Engineering Co., Ltd. is a higher-tech business integrating R & D, creation and procedure of vacuum gear. The organization has robust technological power, superb gear and thoughtful soon after-income services. The item manufacturing approach is managed in rigorous accordance with IS09001 high quality system. It mostly generates and sells screw vacuum pump, roots pump, claw vacuum pump, runoff vacuum pump, scroll pump, h2o ring vacuum pump, vacuum device and other vacuum programs.
New plant plHangZhou
The company’s items have been for a amount of foodstuff, drugs, refrigeration, drying vegetation and a amount of transformer related equipment producers for vacuum tools. The merchandise are broadly used in vacuum drying and dehydration, kerosene vapor section drying, vacuum impregnation, vacuum metallurgy, vacuum coating, vacuum evaporation, vacuum focus, oil and gas recovery, and many others.
Substantial precision machining gear
The company cooperates with faculties and universities to study and create core systems, and owns dozens of independent mental home patents. Adhering to the basic tenet of top quality, status and provider, the company requires leading-edge engineering of vacuum pump as its personal responsibility, and wholeheartedly serves buyers of vacuum gear application in numerous industries with demanding doing work perspective and specialist working type.
Item top quality wins consumer cooperation
In shipment
ISO 9001
Welcome to deliver your requirements, we will offer you with the greatest service,
supply the biggest support!!!
|
/ Piece | |
1 Piece (Min. Order) |
###
| Warranty: | One Year |
|---|---|
| Oil or Not: | Oil Free |
| Structure: | Screw |
| Exhauster Method: | Entrapment Vacuum Pump |
| Vacuum Degree: | High Vacuum |
| Work Function: | Mainsuction Pump |
###
| Customization: |
|---|
###
| Type | Maximum air volume m3/min |
Pressure limit Pa | power kW | revolution rpm | Motor explosion-proof grade | Water consumption L/min |
noise dB(A) | weight kg |
| 2BV2060-EX | 0.45 | 3300 | 1.1 | 2880 | d II BT4 | 2 | 62 | 39 |
| 2BV2061-EX | 0.87 | 3300 | 1.5 | 2880 | d II BT4 | 2 | 65 | 45 |
| 2BV2070-EX | 1.33 | 3300 | 2.2 | 2880 | d II BT4 | 2.5 | 66 | 66 |
| 2BV2071-EX | 1.83 | 3300 | 3 | 2880 | d II BT4 | 4.2 | 72 | 77 |
| 2BV6110 | 2.75 | 3300 | 4 | 1450 | d II BT4 | 7 | 63 | 153 |
| 2BV6111 | 3.83 | 3300 | 5.5 | 1450 | d II BT4 | 8.5 | 68 | 208 |
| 2BV6121 | 4.68 | 3300 | 7.5 | 1450 | d II BT4 | 10 | 69 | 240 |
| 2BV6131 | 6.68 | 3300 | 11 | 1450 | d II BT4 | 15 | 73 | 320 |
| 2BV6161 | 8.3 | 3300 | 15 | 970 | d II BT4 | 20 | 74 | 446 |
|
/ Piece | |
1 Piece (Min. Order) |
###
| Warranty: | One Year |
|---|---|
| Oil or Not: | Oil Free |
| Structure: | Screw |
| Exhauster Method: | Entrapment Vacuum Pump |
| Vacuum Degree: | High Vacuum |
| Work Function: | Mainsuction Pump |
###
| Customization: |
|---|
###
| Type | Maximum air volume m3/min |
Pressure limit Pa | power kW | revolution rpm | Motor explosion-proof grade | Water consumption L/min |
noise dB(A) | weight kg |
| 2BV2060-EX | 0.45 | 3300 | 1.1 | 2880 | d II BT4 | 2 | 62 | 39 |
| 2BV2061-EX | 0.87 | 3300 | 1.5 | 2880 | d II BT4 | 2 | 65 | 45 |
| 2BV2070-EX | 1.33 | 3300 | 2.2 | 2880 | d II BT4 | 2.5 | 66 | 66 |
| 2BV2071-EX | 1.83 | 3300 | 3 | 2880 | d II BT4 | 4.2 | 72 | 77 |
| 2BV6110 | 2.75 | 3300 | 4 | 1450 | d II BT4 | 7 | 63 | 153 |
| 2BV6111 | 3.83 | 3300 | 5.5 | 1450 | d II BT4 | 8.5 | 68 | 208 |
| 2BV6121 | 4.68 | 3300 | 7.5 | 1450 | d II BT4 | 10 | 69 | 240 |
| 2BV6131 | 6.68 | 3300 | 11 | 1450 | d II BT4 | 15 | 73 | 320 |
| 2BV6161 | 8.3 | 3300 | 15 | 970 | d II BT4 | 20 | 74 | 446 |
Types of vacuum pumps
A vacuum pump is a device that draws gas molecules from a sealed volume and maintains a partial vacuum. Its job is to create a vacuum in a volume, usually one of several. There are several types of vacuum pumps, such as root pumps, diaphragm pumps, rotary piston pumps, and self-priming centrifugal pumps.
The diaphragm pump is a dry positive displacement vacuum pump
Diaphragm pumps are a versatile type of vacuum pump. They can be installed in a variety of scenarios including container emptying, positive suction, and simultaneous fluid mixing. Their performance depends on the stiffness and durability of the diaphragm, which in turn depends on the material.
They have good performance when running in dry mode. Diaphragm pumps work very similarly to the human heart, which is why they are often used to create artificial hearts. In addition, the diaphragm pump is self-priming and has high efficiency. They are also capable of handling the most viscous liquids and are used in almost all industries.
However, this type of pump has several disadvantages. One of them is that they are difficult to restart after a power outage. Another disadvantage is that they can generate a lot of heat. Fortunately, this heat is carried away by airflow. However, this heat builds up in the multistage pump. If this happens, the diaphragm or motor may be damaged. Diaphragm pumps operating in two or more stages should be fitted with solenoid valves to maintain vacuum stability.
Diaphragm pumps are a good choice for drying processes where hygiene is important. These pumps have check valves and rubber or Teflon diaphragms. Diaphragm pumps are also ideal for high viscosity applications where shear sensitivity is important. 
Roots pumps are dry method centrifugal pumps
Roots pumps use a vane rotor pump with two counter-rotating vanes that move in opposite directions to move the gas. They are often the first choice for high-throughput process applications. Depending on the size and number of blades, they can withstand up to 10 Torr.
Centrifugal pumps have several advantages, including the ability to handle corrosive fluids and high temperatures. However, when choosing a pump, it is essential to choose a reputable manufacturer. These companies will be able to advise you on the best pump design for your needs and provide excellent after-sales support. Roots pumps can be used in a wide range of industrial applications including chemical, food, and biotechnology.
The Roots pump is a dry centrifugal pump whose geometry enables it to achieve high compression ratios. The screw rotors are synchronized by a set of timing gears that allow gas to pass in both directions and create a compressed state in the chamber. The pre-compressed gas is discharged through a pressure connection and cooled with water. Some pumps are also able to accept additional cooling gas, but this should be done with caution.
The size of the impeller plays an important role in determining the pump head. The impeller diameter determines how high the pump can lift the liquid. Impeller speed also affects the head. Since the head is proportional to the specific gravity of the liquid, the available suction pressure will be proportional to the density of the liquid. The density of water is about 1.2 kg/m3, and the suction pressure of the centrifugal pump is not enough to lift the water.
The rotary vane pump is a self-priming centrifugal pump
A rotary vane pump is a centrifugal pump with a circular pump head and a cycloid cam that supports the rotor. The rotor is close to the cam wall, and two side plates seal the rotor. Vanes in vane pumps are installed in these cavities, and the rotor rotates at high speed, pushing fluid in and out of the pump. The pump offers several advantages, including a reversible design and the ability to handle a wide variety of clean fluids.
Agknx Pumps manufactures a wide range of vane pumps that combine high performance, low cost, and easy maintenance. These pumps handle medium to high viscosity liquids up to 500 degrees Fahrenheit and 200,000 SSU.
The suction side of the rotary vane pump has a discharge port, and the valve prevents the backflow of the discharge air. When the maximum pressure is reached, the outlet valve closes to prevent the backflow of exhaust gas. The mechanical separation step separates the oil from the gas in the pump circuit and returns the remaining oil particles to the sump. The float valve then reintroduces these oil particles into the oil circuit of the pump. The gas produced is almost oil-free and can be blown out of a pipe or hose.
Rotary vane pumps are self-priming positive displacement pumps commonly used in hydraulic, aeration, and vacuum systems. Unlike gear pumps, rotary vane pumps can maintain high-pressure levels while using relatively low suction pressures. The pump is also very effective when pumping viscous or high-viscosity liquids. 
Rotary piston pumps are dry method positive displacement pumps
Rotary piston pumps are dry positive displacement pumps designed to deliver high-viscosity fluids. They are capable of pumping a variety of liquids and can run dry without damaging the liquid. Rotary piston pumps are available in a variety of designs. Some are single shafts, some are two shafts and four bearings.
Positive displacement pumps operate slower than centrifugal pumps. This feature makes the positive displacement pump more sensitive to wear. Piston and plunger reciprocating pumps are particularly prone to wear. For more demanding applications, progressive cavity, diaphragm or lobe pumps may be a better choice.
Positive displacement pumps are typically used to pump high-viscosity fluids. This is because the pump relies on a mechanical seal between the rotating elements and the pump casing. As a result, when fluids have low viscosity, their performance is limited. Additionally, low viscosity fluids can cause valve slippage.
These pumps have a piston/plunger arrangement using stainless steel rotors. Piston/piston pumps have two cavities on the suction side. The fluid then flows from one chamber to the other through a helical motion. This results in very low shear and pulsation rates. The pump is usually installed in a cylindrical housing.
Rotary vane pump corrosion resistance
Rotary vane vacuum pumps are designed for use in a variety of industries. They feature plasma-treated corrosion-resistant parts and anti-suck-back valves to help reduce the number of corrosive vapors entering the pump. These pumps are commonly used in freeze dryers, vacuum ovens, and degassing processes. The high flow rates they provide in their working vacuum allow them to speed up processes and reduce the time it takes to run them. Plus, they have energy-efficient motors and silent volume. <br/While rotary vane vacuum pumps are relatively corrosion resistant, they should not be used for aggressive chemicals. For these chemicals, the most suitable pump is the chemical mixing pump, which combines two types of pumps to improve corrosion resistance. If the application requires a more powerful pump, a progressive cavity pump (eg VACUU*PURE 10C) is suitable.
Oil seals used in rotary vane pumps are important to pump performance. The oil seal prevents corrosion of the aluminum parts of the rotary vane pump and prolongs the service life. Most rotary vane vacuum pumps have a standard set of components, although each component may have different oil seals.
Rotary vane vacuum pumps are the most common type of positive displacement pump. They provide quiet operation and long service life. They are also reliable and inexpensive and can be used in a variety of applications. 
Roots pumps are primarily used as a vacuum booster
Root vacuum pumps are mainly used as vacuum boosters in industrial applications. They need a thorough understanding of operating principles and proper maintenance to function properly. This course is an introduction to Roots vacuum pumps, covering topics such as pump principles, multi-stage pumps, temperature effects, gas cooling, and maintenance.
Roots pumps have many advantages, including compact and quiet operation. They do not generate particles and have a long service life. They also don’t require oil and have a small footprint. However, Roots pumps have several disadvantages, including relatively high maintenance costs and low pumping speeds near atmospheric pressure.
Root vacuum pumps are often used with rotary vane vacuum pumps. They work on the same principle, the air enters a conveying unit formed by two rolling pistons in the housing. The piston heads are separated from each other, and the air passes through the unit without being reduced until it is discharged. When the air in the next unit reaches a higher absolute pressure, it is expelled from the last unit.
Roots pumps can be classified as sheathed or sealed. Roots pumps with sealed motors are suitable for pumping toxic gases. They have less clearance between the stator and motor rotor and have a sealed tank.
editor by czh 2023-03-27